The product is received frontally on the conveyor entrance. Cylindrical containers are arranged on lanes according to their direction of travel. A Splitter system will be used to classify the product on different lanes when working with square or rectangle-shaped containers. A pneumatic brake system is used to separate the products in the requested formats. The product is wrapped with film inside the shrink wrapping tunnel.

Forms 1200x800mm and/or 800x600mm trays with flat cardboard sheets, applying hot glue to the four corners of the sheet. Specially designed to work on lines with a Robot that pre-bundles the format and positions it on the formed tray.

Wrap Around Packer used to bundle products in closed boxes or on cardboard trays, with maximum dimensions 1000×600 mm. Half Europallet or half American pallet.

The product is received at a 90º angle on the conveyor entrance. The number of lanes on the machine will depend on the line product and format requirements. A pneumatic brake system is used to separate the products. The bottles are wrapped with film inside the shrink wrapping tunnel.

The product is received frontally on the conveyor entrance. Cylindrical containers are arranged on lanes according to their direction of travel. A Splitter system will be used to classify the product on different lanes when working with square or rectangle-shaped containers. A pneumatic brake system is used to separate the products in the requested formats. The suction pad, chain with retraction and lifting element assembly positions the cardboard sheets on the top of the machine, so the bar assembly places the product on the cardboard sheet. The product on the cardboard sheet wrapped with film is shrink wrapped in the shrink wrapping tunnel.

The product is placed between the guides of the pushing cylinder. The two start push-buttons are pressed; the packaging and shrink wrapping process is fully automatic.