The input system changes according to the product, production and bundling requirements. The suction pads of the supply system are placed on the base of the cardboard sheet, positioning the raised side panels between the chain folding elements. The feeding system moves the bundle to the opened box/tray, which is formed according to the type of product. The flaps are glued with hot glue using a Hot Melt unit. The lower (for boxes/trays) and upper trainer (only for boxes) folds al flaps of the box/tray.
The product is received frontally on the conveyor entrance. Cylindrical containers are arranged on lanes according to their direction of travel. A Splitter system will be used to classify the product on different lanes when working with square or rectangle-shaped containers. A pneumatic brake system is used to separate the products in the requested formats. The suction pad, chain with retraction and lifting element assembly positions the cardboard sheets on the top of the machine, so the bar assembly places the product on the cardboard sheet. The product on the cardboard sheet wrapped with film is shrink wrapped in the shrink wrapping tunnel.
The product is received at a 90º angle on the conveyor entrance. The number of lanes on the machine will depend on the line product and format requirements. A pneumatic brake system is used to separate the products. The suction pad and chain assembly positions the cardboard sheets, so that the pushing cylinder displaces the bundle and cardboard sheet to the welding zone. The product on the cardboard sheet wrapped with film is shrink wrapped in the shrink wrapping tunnel.
The product is placed on the machine’s input tray at 90º. The machine has a braking, decompression and pushing cylinder assembly that separates the product in the requested formats. A sequential program will be used, according to the bundling operation of the machine, pushing the first row and then pushing all other rows required to complete the bundle.
The product is placed at 90º on the conveyor at the machine entrance. The presence of the package is detected at the end of the conveyor, Activate the decompression cylinder so that the pneumatic pushing system moves the product to the welding zone. It automatically shrink wraps individual units of different products and/or cardboard trays with pre-bundled products. This model does not bundle products.