Medium production rate Only film bottle shrink wrapping machine (15-17 p/min)

retáctiladora solo film botellas

The product is received frontally on the conveyor entrance. Cylindrical containers are arranged on lanes according to their direction of travel. A Splitter system will be used to classify the product on different lanes when working with square or rectangle-shaped containers. A pneumatic brake system is used to separate the products in the requested formats. The product is wrapped with film inside the shrink wrapping tunnel.

It belongs to the category:

Low production rate Wrap Around Packer (8-10 boxes/min)

Encajadora Wrap Around baja producción (8-10 cajas/min)

The input system changes according to the product, production and bundling requirements. The suction pads of the supply system are placed on the base of the cardboard sheet, positioning the raised side panels between the chain folding elements. The feeding system moves the bundle to the opened box/tray, which is formed according to the type of product. The flaps are glued with hot glue using a Hot Melt unit. The lower (for boxes/trays) and upper trainer (only for boxes) folds al flaps of the box/tray.

It belongs to the category:

Medium production rate cardboard sheet shrink wrapper (14-16 p/min)

Retractiladora sobre placa de cartón media producción (14-16 p/min)

The product is received frontally on the conveyor entrance. Cylindrical containers are arranged on lanes according to their direction of travel. A Splitter system will be used to classify the product on different lanes when working with square or rectangle-shaped containers. A pneumatic brake system is used to separate the products in the requested formats. The suction pad, chain with retraction and lifting element assembly positions the cardboard sheets on the top of the machine, so the bar assembly places the product on the cardboard sheet. The product on the cardboard sheet wrapped with film is shrink wrapped in the shrink wrapping tunnel.

It belongs to the category:

Shrink wrapper for trays with product fed at 90º

Retractiladora para bandejas con entrada producto a 90º

The product is placed at 90º on the conveyor at the machine entrance. The presence of the package is detected at the end of the conveyor, Activate the decompression cylinder so that the pneumatic pushing system moves the product to the welding zone. It automatically shrink wraps individual units of different products and/or cardboard trays with pre-bundled products. This model does not bundle products.

It belongs to the category: